So, I got this box in the mail...

63VDub · Pro Headcase Joined: Dec 11, 2014 Posts: 164

haven't got the settings lined out yet, but the limiter to the speed is going to be how fast I can open and close the bolt. Figure about 30 cps since it's hosed. Bolt is Delrin. I was hoping to use a GBR with a Delrin shaft and bolt, but couldn't get my hands on one before I sent it off to mill. If I get another one made, I'll toss a stock ram in the Flame and sacrifice my GBR for it.

pump

just need to thread the front of the GBR, or better yet make a rammer out of delrin

also what would be the fastest cycling a smaller piston/shaft like a cocker cycle faster?

63VDub · Pro Headcase Joined: Dec 11, 2014 Posts: 164

okay, here's an ICDO only update:

it shoots paint! i'm uploading the very first pod ever put through her now. via crappy cell service, so it might be tomorrow before it's done.

Disclaimer: i'm ugly and dirty from work, but you guys don't want to see me anyway. I still need to tweak the settings a lot. at high rates of fire, the balls go about 5 feet, but up to about 5bps, it's very nice. recoil is less than anything i have ever shot. EVER. but it frickin works!

pump

check Cdel and Coff
those are what give me drop off at high rates o fire

QEVS might help with keeping cycle times more consistent

maloneoni

i am excited to see this.

63VDub · Pro Headcase Joined: Dec 11, 2014 Posts: 164

my CDEL is about half of what i need it at. my COFF is close to theorhetically correct. dwell is a little high. hpr at 250" lpr at 20. yeah, a registered 20 on my ram guage. vid is here:

www.youtube.com/watch?...ture_gdata

pump

yeah with the MQ there is no hammer delay, it just shoots!!!!
here is pic
www.halfcocker.com/alb...meline.gif

imo the cocker has less hammer delay than open bolt guns, and the mq makes it even less

hey congrats!!!! your the first to do use an MQ with an internal ram i know of!!!!

fivestring

oh man cool video for sure. I didn't realize it was going to be closed bolt!!

maloneoni

That is badass.

63VDub · Pro Headcase Joined: Dec 11, 2014 Posts: 164

Guys, thanks for yopur kind words.

Pump, I had envisioned a delrin shated GBR, but didn't have one available. Plus, the old school coolness of the MAC was irresistible. I may have to use qevs down the road, does anyone make them in a straight instead of 90? Also, I know that there is at least one MQ'ed Excal out there, so I'm not the first internal ram, but I'm almost positive I have the first stacked tube internal ram.

Now, I need to find some more defiant bodies...