Bushmaster parts. standard body, 1 tray, 1 frame, .. everything works that I remember. $20 but I will split it up if you don't want everything.
NOTE RAM IS SOLD TO JT. PDS body, tray and frame is sold
various frames. as is, what you see is what you get. $5 for any of them, $15 for all.
I did not want to inventory the freestyle parts, so if you see something you want more info on, let me know. Not selling everything, but don't need to keep everything either.
red promaster bodies. top body is SOLD, bottom is pretty banged up but still usable $15.
black promaster. This one has a leak, I think in the HPR. I've changed every o-ring, lubed it, changed hoses, still a slight leak. Slow enough that I can't hear it, but enough that the HPR drops 50 psi over a minute or so. I don't want to take it apart again. $80 shipped, with parts shown on it. It does shoot. If you need / want parts from it, that may be possible as well.
bolts and valves.
promaster bolts, $12, one sold to BRONX
bushy bolts $10,
red bolt is home dyed and looks like they home-cut the oring slots. I have not used it but it was in a marker when I got it. $8 for it.
Valves: 1 ebay, $12. 2 stock, $7 each, I think a vapor valve?? $10. None are tested, but look in good condition.
Pins can go to whoever buys the first 2 bolts if they need it. If not, I ask you to let the next person have the opportunity. SILVER pin GONE
either ASA, with gauge, $15.
Bag of crap hyper 2 (bought it from someone and the housing is warped so it is not usable as is) internal parts are ok, so is the top piece. $12.
The shocktech tray is new, never used, SOLD
awesome drop, $5.
Macdev LPR tester $20.
Higly damaged LPR, $5 or free with another buy.
Manifolds, one parker one hump, $10 each or $15 both.
NDFS parts. body has a couple of helicoiled holes, but I think they are all good. Rear block has one partially stripped hole where the block mounts to it, grip frame is only the half shown. $15 for everything.
PDS body, 1 tray, 1 frame SOLD
Gen 2 freestyle. The body has a slightly stripped screw where the manifold mounts to the body, but there is still some usable thread in there. Same bolt shown in the parts box, and its a complete HE bolt. SOLD
Silver Promaster kila detents. SOLD to BRONX.
Harness SOLD to PK5
Black BKO parts. Body has a bad scratch, not sure if LPR works, and the wire is torn from the solenoid so it has not been tested either. There is enough wire to solder to, and I will test it if you want me to. $20 shipped for all in this pic. SOLD
Silver BKO parts. body, tray, Zenitram LPR block, shocktech LPR, AKA volumizer, damaged harness, and unknown solenoid condition. I will also be able to test this if I can get the trigger switch changed out. $35 shipped for all in this pic. SOLD