I got this a while back, and never really got around to getting it working. Since I really have no time to fix it, Im selling this little lot.
Will take 75$ Plus shipping for all, Or heres a list for individual prices (pices do not include shipping)
Trading for mag parts, anything, show me what u have.
03' BKO Body (Volumizer/valve assembly/body) 30$
04' BKO Body (lprv/valveassembly/body) 25$ SOLD
03' BKO Solenoid (possibly broken, will fire after red button is pushed though) 15$
03' BKO Board (not sure of model) 20$
Blue Tray 10$
04 ASA (w/ slightly messed up barb) 15$
03 Ram (w/ barb) 15$
04 Ram (w/ broken barb) 5$
03 ASA (w/ broken barb) 5$
ICD Barrel 10$
Dye Excel 20$
Cut Bolt + Pin 10$
Stock Bolt + Pin 15$
What your getting is what u see (well ur getting the internals too)
So heres all the info that I can think of being important.
Im not sure if the solenoid is bad or not, or the board or the microswith or what, it may just be cause im cheap and buy my batteries from the 99c store. All I can be sure of, the main problem is somewhere in the electronics.
The silver ram has no spring, and the barb is broken and stuck inside, ive tried getting it out, but no luck.
Same with the black 03 ASA, the barb is also broken off and stuck, with marks from where i tried to remove it.
The Barb on the 04 is not in the best condition but isnt broken of like the others.
The 04 body is 1/4 blocked, and not done very well. I didnt do it, it came with a jersey i traded for. But with some griding, it should look fine.
Yes, the frame on the 04 is from the 03, So are the board and solenoid.
Both bodies have the stock valves in them.
Barrels are a stock ICD threaded barrel from the 03, and a 15in Dye Excel AC threaded.